Access easy and reliable pellet 3D printing.

Check out our 3 different variants of the LILY Kit, LILY Pellet Extruder and Auto Pellet Dispenser. Creating access to powerful pellet 3D printing for different budgets and levels of knowledge.

The LILY Kit
LILY Pellet Extruder
Auto Pellet Dispenser
Always included:
500 gr of free Pellets

Get support real-time with our live messaging. Lorem ipsum dolor.

30 Day Money Back Guarantee

Get support real-time with our live messaging. Lorem ipsum dolor.

STL files for 3D printed parts

Get support real-time with our live messaging. Lorem ipsum dolor.

Live Support

Get support real-time with our live messaging. Lorem ipsum dolor.

The LILY Kit

Assembled

This option is for Makers that want to start pellet 3D printing - NOW. The LILY kit comes fully assembled and tested for functionality. It only needs to be installed in your 3D printer. If you want to be ready for pellet 3D printing within 2-3 hours, this is option is for you.
Order now
€1199
€999

€200 OFF
Pre-Order Discount

Set-Up time : 2 hours
Printing time : 0 hours
Assembly time: 0 hours
Maker level: Basic
Tools needed: Standard
Self-bought components needed: NO
LILY Pellet Extruder - Component List:
  • CNC Manufactured Components
  • ✓   1 x Extrusion Srew ( Stainless Steel)
  • ✓   1 x Hopper (Stainless Steel)
  • ✓  1 x Extrusion Barrel ( Bronze-Aluminium)
  • ✓  1 x Heat Shield (Teflon)
  • ✓   1 x Brass Nozzle set w. M6 thread (1.0, 1.5, 2.0, 2.4, 3.0 mm)
  • ✓   2 x Mounting Brackets (Duralumin)
  • Electrical Components & Misc.
  • ✓   1 x HT-NTC100K Thermistor
  • ✓  1 x Heater 6x70mm 80W
  • ✓  2 x Pellet Cooling Fans (Brushless 3010)
  • ✓  1 x Heatsink Fan (Brushless 3010)
  • ✓   1 x Layer Cooling Fan (Brushless 5015)
  • ✓   1 x Set of Nuts and Bolts
  • ✓   4 x Nickel Brass Spacer
  • ✓   1 x Set of Insulation Washers
  • ✓   1 x Kit of IR Level Sensor
  • Motors
  • ✓   1 x NEMA 17 LDO Motor w. a Planetary Gearbox of 19.2:1 (DC 1.0A)
  • 3D Printed Components from ABS
  • ✓   8 x STL Print Files
  • ✓   1 x Hopper Main Casing
  • ✓   2 x Hopper Side Casings
  • ✓  1 x Layer Fan Air Funnel
  • ✓  1 x Knee Cap Feeding Hose Connector
  • Services
  • ✓   Plug & Play Assembly
  • ✓   Functionality Test
Auto Pellet Dispenser - Component List:
  • Electronics & MIsc.
  • ✓  1 x Open Source PC Board pre programmed
  • ✓   1 x Air Pump Regulator Knob
  • ✓   1 x LED illuminated Power button
  • ✓   1 x Power Supply Cord
  • Motors
  • ✓   1 x NEMA 17 Pancake Motor
  • ✓   1 x Low Noise Centrifugal Blower Fan
  • Miscellaneous
  • ✓   1,4m x PE Feeding Hose
  • ✓   1 x Power Supply Cord
  • ✓   1 x Transparent Cylinder with a volumetric ruler of 2,5 kg standard capacity
  • 3D Printed Components:
  • ✓   7 x STL Print Files
  • ✓  2 x TPU Paddle Wheels
  • ✓   1 x Bottom Casing, housing the Motors and Electronics
  • ✓   1 x Cylinder Lid
  • Services
  • ✓   Plug & Play Assembly
  • ✓   Functionality Test
The LILY Kit

Full DIY Set

The full DIY assembly kit is the option for Makers that have decent patience and technical knowledge. With this set you will be able to start 3D printing pellets within 2-3 days. We will provide you with every component needed and a detailed assembly guide.
Order now
€999
€849

€150 OFF
Pre-Order Discount

Set-Up time: 2 hours
Printing time: 36 hours
Assembly time: 3-4 hours
Maker level: Medium
Tools needed: Standard
Self-bought components needed: NO
LILY Pellet Extruder - Component List:
  • CNC Manufactured Components
  • ✓   1 x Extrusion Srew ( Stainless Steel)
  • ✓   1 x Hopper (Stainless Steel)
  • ✓  1 x Extrusion Barrel ( Bronze-Aluminium)
  • ✓  1 x Heat Shield (Teflon)
  • ✓   1 x Brass Nozzle set w. M6 thread (1.0, 1.5, 2.0, 2.4, 3.0 mm)
  • ✓   2 x Mounting Brackets (Duralumin)
  • Electrical Components & Misc.
  • ✓   1 x HT-NTC100K Thermistor
  • ✓  1 x 1 x Heater 6x70mm 80W
  • ✓  2 x Pellet Cooling Fans (Brushless 3010)
  • ✓  1 x Heatsink Fan (Brushless 3010)
  • ✓   1 x Layer Cooling Fan (Brushless 5015)
  • ✓   1 x Set of Nuts and Bolts
  • ✓   4 x Nickel Brass Spacer
  • ✓   1 x Set of Insulation Washers
  • ✓   1 x Kit of IR Level Sensor
  • Motors
  • ✓   1 x NEMA 17 LDO Motor w. a Planetary Gearbox of 19.2:1 (DC 1.0A)
  • 3D Printed Components from ABS
  • ✓   8 x STL Print Files
  • X   1 x Hopper Main Casing
  • X   2 x Hopper Side Casings
  • X  1 x Layer Fan Air Funnel
  • X  1 x Knee Cap Feeding Hose Connector
  • Services
  • X   Plug & Play Assembly
  • X   Functionality Test
Auto Pellet Dispenser - Component List:
  • Electronics & MIsc.
  • ✓  1 x Open Source PC Board pre programmed
  • ✓   1 x Air Pump Regulator Knob
  • ✓   1 x LED illuminated Power button
  • ✓   1 x Power Supply Cord
  • Motors
  • ✓   1 x NEMA 17 Pancake Motor
  • ✓   1 x Low Noise Centrifugal Blower Fan
  • Miscellaneous
  • ✓   1 ,4m x PE Feeding Hose
  • ✓   1 x Power Supply Cord
  • X   1 x Transparent Cylinder with a volumetric ruler of 2,5 kg standard capacity
  • 3D Printed Components:
  • ✓   7 x STL Print Files
  • ✓  2 x TPU Paddle Wheels
  • X   1 x Bottom Casing, housing the Motors and Electronics
  • X   1 x Cylinder Lid
  • Services
  • X   Plug & Play Assembly
  • X   Functionality Test
The LILY Kit

Core DIY Set

The Core kit is for Makers that have deep technical knowledge and the willingness to source the missing compatible components. This option is our most economic offer and will provide you with the core components and a detailed bill of materials and assembly guide.
Order now
€799
€699

€100 OFF
Pre-Order Discount

Set-Up time: 3-4 hours
Printing time: 36 hours
Assembly time: 3-4 hours
Maker level: Expert
Tools needed: Standard
Self-bought components needed: YES
LILY Pellet Extruder - Component List:
  • CNC Manufactured Components
  • ✓   1 x Extrusion Srew ( Stainless Steel)
  • ✓   1 x Hopper (Stainless Steel)
  • ✓  1 x Extrusion Barrel ( Bronze-Aluminium)
  • ✓  1 x Heat Shield (Teflon)
  • ✓   1 x Brass Nozzle set w. M6 thread (1.0, 1.5, 2.0, 2.4, 3.0 mm)
  • ✓   2 x Mounting Brackets (Duralumin)
  • Electrical Components & Misc.
  • ✓   1 x HT-NTC100K Thermistor
  • ✓  1 x Heater 6x70mm 80W
  • ✓  2 x  Pellet Cooling Fans (Brushless 3010)
  • ✓  1 x  Heatsink Fan (Brushless 3010)
  • ✓   1 x Layer Cooling Fan (5015)
  • ✓   1 x Set of Nuts and Bolts
  • ✓   4 x Nickel Brass Spacer
  • ✓   1 x Set of Insulation Washers
  • ✓   1 x Kit of IR Level Sensor
  • Motors
  • X   1 x NEMA 17 LDO Motor w. a Planetary Gearbox of 19.2:1 (DC 1.0A)
  • 3D Printed Components from ABS
  • ✓   8 x STL Print Files
  • X   1 x Hopper Main Casing
  • X   2 x Hopper Side Casings
  • X  1 x Layer Fan Air Funnel
  • X  1 x Knee Cap Feeding Hose Connector
  • Services
  • X   Plug & Play Assembly
  • X   Functionality Test
Auto Pellet Dispenser - Component List:
  • Electronics & MIsc.
  • ✓  1 x Open Source PC Board pre programmed
  • ✓   1 x Air Pump Regulator Knob
  • ✓   1 x LED illuminated Power button
  • ✓   1 x Power Supply Cord
  • Motors
  • X   1 x NEMA 17 Pancake Motor
  • X   1 x Low Noise Centrifugal Blower Fan
  • Miscellaneous
  • ✓   1 ,4m x PE Feeding Hose
  • ✓   1 x Power Supply Cord
  • X   1 x Transparent Cylinder with a volumetric ruler of 2,5 kg standard capacity
  • 3D Printed Components:
  • ✓   7 x STL Print Files
  • ✓  2 x TPU Paddle Wheels
  • X   1 x Bottom Casing, housing the Motors and Electronics
  • X   1 x Cylinder Lid
  • Services
  • X   Plug & Play Assembly
  • X   Functionality Test
Always included:
500 gr of free Pellets

Get support real-time with our live messaging. Lorem ipsum dolor.

30 Day Money Back Guarantee

Get support real-time with our live messaging. Lorem ipsum dolor.

STL files for 3D printed parts

Get support real-time with our live messaging. Lorem ipsum dolor.

Live Support

Get support real-time with our live messaging. Lorem ipsum dolor.

The LILY Pellet Extruder

Assembled

This option is for Makers that want a pellet extruder that works right out of the box. The LILY Pellet Extruder comes fully assembled and tested for functionality. It only needs to be installed in your 3D printer.
Order now
€999
€849

€150 OFF
Pre-Order Discount

Set-Up time : 2 hours
Printing time : 0 hours
Assembly time: 0 hours
Maker level: Basic
Tools needed: Standard
Self-bought components needed: NO
LILY Pellet Extruder - Component List:
  • CNC Manufactured Components
  • ✓   1 x Extrusion Srew ( Stainless Steel)
  • ✓   1 x Hopper (Stainless Steel)
  • ✓  1 x Extrusion Barrel ( Bronze-Aluminium)
  • ✓  1 x Heat Shield (Teflon)
  • ✓   1 x Brass Nozzle set w. M6 thread (1.0, 1.5, 2.0, 2.4, 3.0 mm)
  • ✓   2 x Mounting Brackets (Duralumin)
  • Electrical Components & Misc.
  • ✓   1 x HT-NTC100K Thermistor
  • ✓  1 x Heater 6x70mm 80W
  • ✓  2 x Pellet Cooling Fans (Brushless 3010)
  • ✓  1 x Heatsink Fan (Brushless 3010)
  • ✓   1 x Layer Cooling Fan (Brushless 5015)
  • ✓   1 x Set of Nuts and Bolts
  • ✓   4 x Nickel Brass Spacer
  • ✓   1 x Set of Insulation Washers
  • ✓   1 x Kit of IR Level Sensor
  • Motors
  • ✓   1 x NEMA 17 LDO Motor w. a Planetary Gearbox of 19.2:1 (DC 1.0A)
  • 3D Printed Components from ABS
  • ✓   8 x STL Print Files
  • ✓   1 x Hopper Main Casing
  • ✓   2 x Hopper Side Casings
  • ✓  1 x Layer Fan Air Funnel
  • ✓  1 x Knee Cap Feeding Hose Connector
  • Services
  • ✓   Plug & Play Assembly
  • ✓   Functionality Test
The LILY Pellet Extruder

Full DIY Set

The full DIY assembly set is the option for Makers that have decent patience and technical knowledge. We will provide you with every component needed and a detailed assembly guide.
Order now
€899
€799

€100 OFF
Pre-Order Discount

Set-Up time: 2 hours
Printing time: 19.5 hours
Assembly time: 1-2 hours
Maker level: Medium
Tools needed: Standard
Self-bought components needed: NO
LILY Pellet Extruder - Component List:
  • CNC Manufactured Components
  • ✓   1 x Extrusion Srew ( Stainless Steel)
  • ✓   1 x Hopper (Stainless Steel)
  • ✓  1 x Extrusion Barrel ( Bronze-Aluminium)
  • ✓  1 x Heat Shield (Teflon)
  • ✓   1 x Brass Nozzle set w. M6 thread (1.0, 1.5, 2.0, 2.4, 3.0 mm)
  • ✓   2 x Mounting Brackets (Duralumin)
  • Electrical Components & Misc.
  • ✓   1 x HT-NTC100K Thermistor
  • ✓  1 x 1 x Heater 6x70mm 80W
  • ✓  2 x Pellet Cooling Fans (Brushless 3010)
  • ✓  1 x Heatsink Fan (Brushless 3010)
  • ✓   1 x Layer Cooling Fan (Brushless 5015)
  • ✓   1 x Set of Nuts and Bolts
  • ✓   4 x Nickel Brass Spacer
  • ✓   1 x Set of Insulation Washers
  • ✓   1 x Kit of IR Level Sensor
  • Motors
  • ✓   1 x NEMA 17 LDO Motor w. a Planetary Gearbox of 19.2:1 (DC 1.0A)
  • 3D Printed Components from ABS
  • ✓   8 x STL Print Files
  • X   1 x Hopper Main Casing
  • X   2 x Hopper Side Casings
  • X  1 x Layer Fan Air Funnel
  • X  1 x Knee Cap Feeding Hose Connector
  • Services
  • X   Plug & Play Assembly
  • X   Functionality Test
The LILY Pellet Extruder

Core DIY Set

The Core kit is for expert Makers, who is willing to source the missing compatible components. We will provide you with the core components, a bill of materials, assembly guide and the documentation.
Order now
€699
€649

€50 OFF
Pre-Order Discount

Set-Up time: 2-3 hours
Printing time: 19.5 hours
Assembly time: 2-3 hours
Maker level: Expert
Tools needed: Standard
Self-bought components needed: YES
LILY Pellet Extruder - Component List:
  • CNC Manufactured Components
  • ✓   1 x Extrusion Srew ( Stainless Steel)
  • ✓   1 x Hopper (Stainless Steel)
  • ✓  1 x Extrusion Barrel ( Bronze-Aluminium)
  • ✓  1 x Heat Shield (Teflon)
  • ✓   1 x Brass Nozzle set w. M6 thread (1.0, 1.5, 2.0, 2.4, 3.0 mm)
  • ✓   2 x Mounting Brackets (Duralumin)
  • Electrical Components & Misc.
  • ✓   1 x HT-NTC100K Thermistor
  • ✓  1 x Heater 6x70mm 80W
  • ✓  2 x  Pellet Cooling Fans (Brushless 3010)
  • ✓  1 x  Heatsink Fan (Brushless 3010)
  • ✓   1 x Layer Cooling Fan (5015)
  • ✓   1 x Set of Nuts and Bolts
  • ✓   4 x Nickel Brass Spacer
  • ✓   1 x Set of Insulation Washers
  • ✓   1 x Kit of IR Level Sensor
  • Motors
  • X   1 x NEMA 17 LDO Motor w. a Planetary Gearbox of 19.2:1 (DC 1.0A)
  • 3D Printed Components from ABS
  • ✓   8 x STL Print Files
  • X   1 x Hopper Main Casing
  • X   2 x Hopper Side Casings
  • X  1 x Layer Fan Air Funnel
  • X  1 x Knee Cap Feeding Hose Connector
  • Services
  • X   Plug & Play Assembly
  • X   Functionality Test
Always included:
500 gr of free Pellets

Get support real-time with our live messaging. Lorem ipsum dolor.

30 Day Money Back Guarantee

Get support real-time with our live messaging. Lorem ipsum dolor.

STL files for 3D printed parts

Get support real-time with our live messaging. Lorem ipsum dolor.

Live Support

Get support real-time with our live messaging. Lorem ipsum dolor.

Auto Pellet Dispenser

Assembled

This option is for Makers that want a plug & play pellet dispenser. The Auto Pellet Dispenser comes fully assembled and tested for functionality. Please be aware that the standard configuration of the Auto Pellet Dispenser is  specific to the LILY Pellet Extruder, for other pellet extruders you will need to create your own configuration.
‍
Order now
€349
€249

€100 OFF
Pre-Order Discount

Set-Up time: 1 hour
Printing time: 0 hours
Assembly time: 0 hours
Maker level: Medium
Tools needed: Standard
Self-bought components needed: NO
Auto Pellet Dispenser - Component List:
  • Electronics & MIsc.
  • ✓  1 x Open Source PC Board pre programmed
  • ✓   1 x Air Pump Regulator Knob
  • ✓   1 x LED illuminated Power button
  • ✓   1 x Power Supply Cord
  • Motors
  • ✓   1 x NEMA 17 Pancake Motor
  • ✓   1 x Low Noise Centrifugal Blower Fan
  • Miscellaneous
  • ✓   1,4m x PE Feeding Hose
  • ✓   1 x Power Supply Cord
  • ✓   1 x Transparent Cylinder with a volumetric ruler of 2,5 kg standard capacity
  • 3D Printed Components:
  • ✓   7 x STL Print Files
  • ✓  2 x TPU Paddle Wheels
  • ✓   1 x Bottom Casing, housing the Motors and Electronics
  • ✓   1 x Cylinder Lid
  • Services
  • ✓   Plug & Play Assembly
  • ✓   Functionality Test
Auto Pellet Dispenser

Full DIY Set

The full DIY assembly set is the option for Makers that have decent patience and technical knowledge. We will provide you with every component needed and a detailed assembly guide. Please be aware that the standard configuration of the Auto Pellet Dispenser is  specific to the LILY Pellet Extruder, for other pellet extruders you will need to create your own configuration.
Order now
€299
€229

€70 OFF
Pre-Order Discount

Set-Up time: 1 hour
Printing time: 15 hours
Assembly time: 2-3 hours
Maker level: Medium
Tools needed: Standard
Self-bought components needed: NO
Auto Pellet Dispenser - Component List:
  • Electronics & MIsc.
  • ✓  1 x Open Source PC Board pre programmed
  • ✓   1 x Air Pump Regulator Knob
  • ✓   1 x LED illuminated Power button
  • ✓   1 x Power Supply Cord
  • Motors
  • ✓   1 x NEMA 17 Pancake Motor
  • ✓   1 x Low Noise Centrifugal Blower Fan
  • Miscellaneous
  • ✓   1 ,4m x PE Feeding Hose
  • ✓   1 x Power Supply Cord
  • X   1 x Transparent Cylinder with a volumetric ruler of 2,5 kg standard capacity
  • 3D Printed Components:
  • ✓   7 x STL Print Files
  • ✓  2 x TPU Paddle Wheels
  • X   1 x Bottom Casing, housing the Motors and Electronics
  • X   1 x Cylinder Lid
  • Services
  • X   Plug & Play Assembly
  • X   Functionality Test
Auto Pellet Dispenser

Core DIY Set

The Core kit is for Makers that have deep technical knowledge and the willingness to source the missing compatible components. We will provide you with the core components, a  bill of materials and assembly guide. Please be aware that the standard configuration of the Auto Pellet Dispenser is  specific to the LILY Pellet Extruder, for other pellet extruders you will need to create your own configuration.
Order now
€199
€149

€50 OFF
Pre-Order Discount

Set-Up time: 2-3 hours
Printing time: 15 hours
Assembly time: 2-3 hours
Maker level: Expert
Tools needed: Standard
Self-bought components needed: YES
Auto Pellet Dispenser - Component List:
  • Electronics & MIsc.
  • ✓  1 x Open Source PC Board pre programmed
  • ✓   1 x Air Pump Regulator Knob
  • ✓   1 x LED illuminated Power button
  • ✓   1 x Power Supply Cord
  • Motors
  • X   1 x NEMA 17 Pancake Motor
  • X   1 x Low Noise Centrifugal Blower Fan
  • Miscellaneous
  • ✓   1 ,4m x PE Feeding Hose
  • ✓   1 x Power Supply Cord
  • X   1 x Transparent Cylinder with a volumetric ruler of 2,5 kg standard capacity
  • 3D Printed Components:
  • ✓   7 x STL Print Files
  • ✓  2 x TPU Paddle Wheels
  • X   1 x Bottom Casing, housing the Motors and Electronics
  • X   1 x Cylinder Lid
  • Services
  • X   Plug & Play Assembly
  • X   Functionality Test

Break-Even Calculator

The LILY Kit is an investment into the future. The planet and your wallet will be thankful in the long-term. Use our break-even calculator to find out when you will reach break-even and decide if this investment is for you.

Connect with us?

Buy TaaS➝Learn More➝
Company
About UsContact Us
Media
PressBlog
Products
OverviewThe LILY KitLILY Pellet ExtruderAuto Pellet DispenserPricing
Support
DocumentationPrinter & Material CompatibilityFAQsShipping Information
B2B
Become a ResellerOEM requests
VAT Number: 155680667-2-2019
Copyright © 2020 recycl3dprint. All Rights Reserved. | Terms & Conditions |  Privacy & Cookies